FULLY INTEGRATED TRANSCEIVER
I100 SERIESSmall Vessel Tracker
The em-trak AIS I100 Identifier is a fully integrated Class B vessel tracking AIS transponder. All VHF & GPS antennas, along will all electronics and batteries are integrated within a security sealed IPx8 waterproof ruggedized shell. The internal rechargeable battery gives over 5 days of continuous operation within charges. The I100 Identifier is supplied as a complete kit with vessel mounting bracket and mains rapid charging dock.
NOTE: The unit will not function until programmed with the vessel details and a UNIQUE MMSI number. Single units can be programmed prior to dispatch or multiple units can be programmed using the Identifier I100 Configuration Kit 417-0047.
Global next day shipping
- Small and lightweight
- 5 day continuous use from its internal battery
- Takes only 5 hours to completely recharge
- Rugged IPx8 design ensures operational performance
Size 375mm x 67mm max. (H x D)
Weight 350g (identifier unit only)
Mounting Bracket – Min/max Pole Diameter: 25mm to 55mm
Power Supply – Built in 2100mAh Lithium-Ion Battery
Battery Only – 5 Days when transmitting once every 5 minutes
Charge Time – 5 Hours – Charging Dock Supplied With Universal Input AC Adaptor
Single waterproof power and configuration connector built into base of the I100 Identifier
USB interface for configuration (via optional configuration dock)
Transmitter – 1
Receiver – 1
Frequency – 156.025 to 162.025MHz in 25KHz steps
Output Power – 1W-5W customisable
Channel Bandwidth – 25KHz
Modulation Modes – 25KHz GMSK (AIS transmit only)
Bit Rate – 9600 b/s (GMSK) and 1200 b/s (FSK)
Receiver sensitivity – <-107dBm
IEC 60945 Edition 4.0 ‘Protected’ Category
IEC standard, Environmental Requirements
Universal AIS Technical Characteristics
CE Under Radio Equipment Directive (Red) For Europe
In The Box
- 1 x Identifier
- 1 x Vessel Bracket and a Fixings Pack
- 1 x Charging Dock
Global Support & Warranty Service
With em-trak you can buy with confidence. If you are unhappy with your new product for any reason, within two days of receipt and subject to the product and packaging being complete and undamaged, you may return it to us for a full refund.
We are sorry, but we cannot accept the return of any product if you have not advised us in writing within 48 hours of receiving your em-trak product, or if it has been used and or damaged or if any of the package is incomplete. All em-trak products benefit from our three year global warranty.
In the unlikely event of a problem, please contact our Customer Support department (24/7) at <a href=”mailto:[email protected]”>[email protected]</a> and one of our experts will work with you to resolve your issue or arrange the repair or replacement of your em-trak product. The warranty is invalidated if the product has been incorrectly used, damaged or tampered.
Manuals & Downloads