Products – I100X SERIES
The Identifier I100-X is a ruggedised IPx8 fully self-contained AIS Class B vessel tracking transponder, ideal for small vessel tracking and monitoring. I100-X can power itself using its own internal rapid recharge battery (+120hrs continuous operation), or be connected directly to another onboard power source such as engine, battery or solar with the battery then acting as a backup.
Find your local installer
Model Details
I100-X Details
Features
- Certified AIS Class B Transponder
- 5 day continuous use from its internal battery or connect directly to another onboard power source such as engine, battery or solar for a permanent installation
- Takes only 5 hours to completely recharge
- Rugged IPx8 design ensures operational performance
Technical Specification
PHYSICAL AND ENVIRONMENTAL SPECIFICATION
Size (h x w) – 370 x 67 mm
Weight – 355g
Operating temperature – -25°C to +55°C
Storage temperature – -25°C to +70°C
Ingress protection – IPx8 (1.1m 30 mins)
ELECTRICAL SPECIFICATION
Battery capacity – 2300mAh
Battery type – 3.7V Li-Ion rechargeable
Battery life (default operating conditions) – 120 hours
STANDARDS COMPLIANCE
AIS standards – IEC 62287-1 Ed. 3. ITU-R M.1371.5
Product safety standards – EN60950-1 2006 +A11:2009 +A1:2010 +A12:2011 +A2:2013
Environmental standards – IEC 60945 Ed. 4
GNSS performance standards – IEC 61108-1 Ed 2.0
GNSS
Systems supported – GPS & GLONASS
Channels – 72
Time to first fix from cold start – 26s
VHF TRANSCEIVER
VDL access scheme – CSTDMA
Operating frequency – 156.025MHz – 162.025MHz
Channel bandwidth – 25kHz
Receivers/transmitters – 1 x transmitter
AIS transmitter power – 2W (33dBm radiated)
USER INTERFACE
Buttons – SOS
Indicators – Status indicator
CHARGING DOCK
Size (H x W x D) – 110mm x 120mm x 78mm
Weight – 360g
Power supply – 115V / 240V AC
CONFIGURATION DOCK
Size (H x W x D) – 110mm x 120mm x 78mm
Weight – 360g
Power supply – 115V / 240V AC
PC interface – USB (cable supplied)
In The Box
- 1 x Identifier
- 1 x Vessel Bracket and a Fixings Pack
- 1 x Charging Dock
NOTE: You will also require a Configuration Dock Product Code : 417-0074 (see accessories section). This is used to program the unit prior to deployment.
Global Support & Warranty Service
With em-trak you can buy with confidence. If you are unhappy with your new product for any reason, within two days of receipt and subject to the product and packaging being complete and undamaged, you may return it to us for a full refund.
We are sorry, but we cannot accept the return of any product if you have not advised us in writing within 48 hours of receiving your em-trak product, or if it has been used and or damaged or if any of the package is incomplete. All em-trak products benefit from our three year global warranty.
In the unlikely event of a problem, please contact our Customer Support department (24/7) at <a href=”mailto:support@em-trak.com”>support@em-trak.com</a> and one of our experts will work with you to resolve your issue or arrange the repair or replacement of your em-trak product. The warranty is invalidated if the product has been incorrectly used, damaged or tampered.
Manuals & Downloads
How-to guide
Please see the User Manual above for setting up your I100-X
